RICS 5133 (10-20 kV, 50-150 sq. mm), Adapters Tee to buy in Almaty
RICS, RCAB - system of insulating Tee and direct adapters for bushing according to the EN-50181 standard the C (400/630A) type for cells of distributing devices with gas isolation on tension of 10 and 20 kV
RICS - T - figurative adapters
The set on 3 phases includes the insulating body, a threaded stud with bolt fastening, the back insulating plug, the mounting instruction. Cable terminals and end sleeves are not included in the package. For double connection only the second adapter has a special design which the coupling bushing, the adapter, a threaded stud with bolt fastening, the back plug enters. The second adapter can be connected to any M16, the first on a pin, except for the RICS-51x9 adapter (with OPN).
Accessories to the RICS adapter
| Measuring plug
Measurements on cables can be performed without removal of the adapter. To the place of the back plug of the RICS adapter the measuring plug is inserted. Between phases it is necessary to use plugs of different length to measurements (two standard and one extended). Standard option, L = 290 mm: RICS 5002-50-24 The extended option, L = 390 mm: RICS 5002-50-25 |
| Limiters of an overstrain RDA (OPN) for T - RICS 51x9 adapters
RDA OPN are specially developed for gas-insulated switchgears. They are issued on voltage from 6 to 24 kV. On them it is possible to obtain detailed information and specifications at the nearest office of representation of Tayko Electronics Raykhem. The stub of RICS 5009-50-22 can be established instead of RDA OPN and further can be replaced with it. |
| In double T - the adapter for connection on 630A and 1250A to a bushing on EN 50181 type C:
Each adapter is expected rated current 630A. On 1250A it is necessary to use to double connection, as the first, the adapter of the special RICS-5733-Cu or RICS-5743-Cu type. The scope is same, as for RICS-51x3, specified in the table. |
